1. Material of enclosure – corrosion proof aluminium alloy, max    0,5% Mg
2. Standard seal (enclosure – lid) – neoprene. Temperature resistance: -40°C to +80°C EMC protection on request – to recive through conduct special sealing type HF
3. Protection surface by powder coating (polyester paints), standard color – RAL 7001 (silver-grey),interior of enclosure and sealing zone – unpainted
4. Good resistance against oil, benzines and solvents
5. Mounting holes located outside sealed area, thus not reducing IP protection degree
6. Protection degree – IP 66 acording o PN-EN 60529:2003
7. Impact protection – IK 08 (7 Nm)
8. Screws for lids made of stainless steel and have a flat or a cros cut
9. Threaded holes suitable for mounting plates or DIN mounting rails
10. Cable glands made of polyamide M12(M12PA), M16(M1PA), M20(M2PA) Cable glands made of brassM12(M12M), M16(M1M), M20(M2M)  

The shape and size of the enclosures, as well as their equipment and accessories are suitable for mounting them in various devices and elements, such as terminal strips, earthing strips, etc. It is also possible to rebore and / or thread openings,   to print labels and specific scripts, to additionally equip them with necessary units (cable terminals).